| Suggested Use Case | FORTIAP 25D |
| Hardware | |
| Hardware Type | Remote (Indoor) |
| Number of Antennas | 1 |
| Number of Antennas | 2 internal |
| Peak Antenna Gain | 2 dBi for 2.4 GHz, 3 dBi for 5 GHz |
| Frequency Bands (GHz) | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
| Frequency of Radio 1 | 2.4 GHz b/g/n, 5 GHz a/n |
| Throughput | Up to 300 Mbps |
| Tx/Rx Streams | 2x2 MIMO 2 spatial stream |
| Ethernet Ports | 1x GE RJ45 WAN port, 4x FE RJ45 LAN ports |
| WME Multimedia Extensions | Yes (4 priority queues for voice, video, data and background traffic |
| Simultaneous SSIDs | 8 (7 if background scanning enabled) |
| EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication | WPA™ and WPA2™ with 802.1x or Preshared key, WEP and Web Captive Portal, MAC blacklist & whitelist |
| Maximum Tx Power | 16 dBm (40 mW |
| Mean Time Between Failures | >10 years |
| IEEE Specifications | 802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11n, 802.1x |
| 802.11n Features | 20 MHz and 40 MHz HighThroughput (HT) Support |
| ncreased maximum frame transmission by incorporating A-MPDU and A-MSDU Packet Aggregation | |
| Conserve power via Dynamic MIMO power save | |
| Advanced 802.11n to enhance rate-over-range including: | Low-density parity check (LDPC) encoding |
| Maximum likelihood demodulation (MLD) | |
| Transmit beamforming (TxBF) | |
| Maximum Ratio Combining (MRC) for improved receiver | |
| Mounting Options | Desktop, Wall |
| Included Accessories | AC power adapter and wall mount kit |
| FortiPresence Capable | Yes |
| Wireless Monitoring Capabilities | |
| Frequencies scanned | 2.4 and 5 GHz |
| Full-time scan as dedicated monitor | Yes |
| Dimensions | |
| Length x Width x Height | 0.9 x 2.8 x 1.4 inches (2.28 x 7 x 3.5 cm) |
| Weight | 0.62 lbs (0.28 kg) |
| Package (shipping) Weight | 1.01 lbs (0.46 kg) |
| Environment | |
| Power Supply | Adapter Input: 100–240V AC, 50–60 Hz |
| Power Consumption (Average) | 2.5 W |
| Power Consumption (Maximum) | 2.7 W |
| Humidity | 0–90% non-condensing |
| Operating Temperature | 32–104°F (0–40°C) |
| Storage Temperature | -13–158°F (-25–70°C) |
| Directives | Low Voltage Directive • RoHS |
| Certifications | |
| WiFi Alliance Certified | No |
| Warranty | |
| Limited Lifetime Warranty | Yes |