Model |
Cisco Aironet 1815i Series Access Points |
|
|
Software |
● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.4 or later |
|
● Cisco Mobility Express (future availability) |
|
|
Maximum clients |
● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point |
|
|
802.11ac |
● 2x2 single-user/multiuser MIMO with two spatial streams |
|
● Maximal ratio combining (MRC) |
|
● 20-, 40- and 80-MHz channels |
|
● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) |
|
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) |
|
● 802.11 Dynamic Frequency Selection (DFS) |
|
● Cyclic shift diversity (CSD) support |
|
|
Ethernet ports |
● Authentication with 802.1X or MAC filtered |
|
● Dynamic VLAN or per port |
|
● Traffic locally switched or tunneled back to wireless LAN controller |
|
|
Bluetooth (future availability) |
● Integrated Bluetooth 4.1 (including BLE) radio |
|
● Maximum transmit power: 4 dBm |
|
● Antenna gain: 2 dBi |
|
|
Integrated antennas |
● 2.4 GHz, gain 2 dBi |
|
● 5 GHz, gain 4 dBi |
|
|
Interfaces |
● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) |
|
● Management console port (RJ-45) |
|
|
Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, |
|
boot loader errors |
|
|
System |
● 1 GB DRAM |
|
● 256 MB flash |
|
● 710 MHz quad core |
|
|
Input power requirements |
● Power injector: AIR-PWRINJ5= or AIR-PWRINJ6= |
|
|
Powering options |
● 802.3af/at Ethernet switch |
|
● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=) |
|
● 8.3W (maximum, on PoE) |
|
|
Mounting |
● Included with the access point: mounting bracket AIR-AP-BRACKET8 |
|
|
Dimensions (W x L x H) |
● Access point (without mounting bracket): 6 x 6 x 1.3 in (150.8 x 150.8 x 33 mm) |
|
|
Weight |
● Access point without mounting bracket or any other accessories: 14 oz (400 g) |
|
|