| Feature | Dell™ PowerVault™ MD1200 |
| PERC H800 |
PCI-E 2.0 Host-RAID adapter with two external x4 SAS ports, standard 512MB ports, standard 512MB cache and TBBU (transportable battery-backup unit) |
| standard 512MB cache and TBBU (transportable battery-backup unit) | |
| Drives | Up to twelve (12) hot-pluggable SAS Hard Disk Drives (HDDs) at 7.2K, 10K, and 15K |
| rpm and SAS Solid State Drives (SSDs) | |
| Drive Performance and Capacities | 2.5” SAS HDDs in 3.5” carrier, 10,000 RPM 6Gb/s SAS drives available in 300GB and 600GB |
|
2.5” SAS SSDs in 3.5” carrier, 3Gb/s SSD available in 149GB |
|
| Maximum Capacity (per enclosure) | 24TB using twelve (12) 2TB 7,200 RPM 6Gb/s SAS disk drives |
| Expansion Capabilities | PERC H800 HostRAID adapter enables expansion to 8 enclosures (4 enclosures per port) |
| Enclosure Management Modules (EMM) | 2 EMM provide redundant enclosure management capability |
| RAID Levels | PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50, and 60 |
| Host Connectivity | 1 SAS (SFF 8088) IN connector for connection to the host |
| Expansion Connectivity | 1 SAS (SFF 8088) OUT connector for expansion to an additional enclosure |
| Service Management | 1 6-pin UART mini-DIN connector (for factory use only) |
| Wattage | 600 W |
| Host Heat Dissipation | 188 W |
| Input Voltage Range | Input Voltage Range |
| Frequency Range | 50/60 Hz |
| Amperage | 8.6 A at 100 V, 4.3 A at 240 V |
| Supported Continuous Consumption | up to 1.16 A at +5V , up to 1.6 A at +12V |
| Height x Width x Depth | 8.7cm (3.39 inches) x 48.2cm (18.8 inches) x 59.4cm (23.17 inches) |
| Weight | 28.39 kg (62.6 lb) (maximum configuration) 8.84 kg (19.5 lb) (empty) |
